Center Console

Section for discussion of Chinook interior and appliance issues, repair or installation.
Post Reply
1998chinook
Posts: 83
Joined: August 1st, 2014, 2:32 pm

Center Console

Post by 1998chinook »

So when I was growing up, my Uncle John would always stop by 7-11 for a big gulp almost every time he got in the car. For some reason I picked up his bad habit. Of course I can't just get the average size cup, I have to get the biggest cup they have... which leads me to my most recent mod... I am upgrading my center console with its mere mortal size cup holders to this beauty which should be able to hold my 44 or 52 ouncer:

Image

Image
User avatar
Blue~Go
Senior Member
Posts: 3797
Joined: July 31st, 2014, 1:01 am
Location: 1999 Concourse

Re: Center Console

Post by Blue~Go »

It think that one does top them all for cup holder size. You'll be able to drink out of 55-gallon drums now :mrgreen:

For more on this topic (how it goes on and off, etc.), if anyone is interested, I posted a thread about changing my Beverage Mate for a different console (I believe yours is the circa 2008-present one; I chose the 2--3-2005-ish one).

viewtopic.php?f=4&t=19
1999 Concourse
1998chinook
Posts: 83
Joined: August 1st, 2014, 2:32 pm

Re: Center Console

Post by 1998chinook »

The old and the new console.
Image

The new one installed just like Blue described.
Image
User avatar
Blue~Go
Senior Member
Posts: 3797
Joined: July 31st, 2014, 1:01 am
Location: 1999 Concourse

Re: Center Console

Post by Blue~Go »

Ha ha, I notice you had the "self-launching cup holder" model of console before you upgraded. I had that same one in a previous van. Who designed those cup holders? I mean, had they ever used a cup :?

(For those who have not had the pleasure, any cup that you put in the larger section (which is basically all cups), immediately "self launches" and tips over into the smaller section upon acceleration, deceleration, turning, etc. I still have to restrain myself from automatically reaching over to steady my cup (with the new console).

(Although if anyone is suffering with this style, I did put some slices of pool noodle in the smaller sections which helped about 75%.)
1999 Concourse
User avatar
Dano
**Forum Contributor**
Posts: 311
Joined: August 23rd, 2018, 4:24 am
Location: Ottawa, Canada

Re: Center Console

Post by Dano »

Anyone have any luck finding one of these beauties in a junk yard? Kind of want one now!
"Jewels" - '02 Chinook Concourse XL
User avatar
HoosierB
**Forum Contributor**
Posts: 473
Joined: May 21st, 2015, 7:00 pm
Location: South Bend, Indiana

Re: Center Console

Post by HoosierB »

"Wanda" – '01 Chinook Concourse XL V10
User avatar
Dano
**Forum Contributor**
Posts: 311
Joined: August 23rd, 2018, 4:24 am
Location: Ottawa, Canada

Re: Center Console

Post by Dano »

Thanks Hoose! Unfortunately, that's about $225 Canadian by the time it gets to me, although that is virtually brand new...Think I might call a few wreckers, maybe I'll get lucky but I appreciate the effort!
"Jewels" - '02 Chinook Concourse XL
User avatar
HoosierB
**Forum Contributor**
Posts: 473
Joined: May 21st, 2015, 7:00 pm
Location: South Bend, Indiana

Re: Center Console

Post by HoosierB »

I looked for a year... wrecking yards, swap meets... even van conversion builders here in RV country for new model "take outs". I finally pulled the trigger on a new one. Prices have been up and down over the years. $149 is not bad for new. Good luck in your search!
"Wanda" – '01 Chinook Concourse XL V10
User avatar
Dano
**Forum Contributor**
Posts: 311
Joined: August 23rd, 2018, 4:24 am
Location: Ottawa, Canada

Re: Center Console

Post by Dano »

Now I HAVE to have one! I'll let you know what I turn up, hopefully I get lucky :?
"Jewels" - '02 Chinook Concourse XL
Post Reply